-
ProductsCommitted to the realization of profiles, plates, pipes and other metal materials cutting, welding, cladding, non-metallic materials cutting, carving and other fields, full coverage applications.
-
SupportProvide solutions within 4 hours, arrive at the scene within 24 hours, and provide regular and active on-site service
-
About UsShandong FINCM Future Intelligent Manufacturing Co., Ltd. is a listed company-Huaming Equipment. It is an intelligent technology company integrating intelligent manufacturing equipment, automated production lines, laser proce
-
NewsTo promote the sustainable development of enterprises by technological innovation and expanding industry applications.
-
Small diameter high speed laser pipe cutting machine
FT-6012DS
Parameters
| Model | FT-6012DS | |||
| Pipe type | Round tube/square tube/rectangular tube/oval tube/channel steel/L steel/angle steel | |||
| Pipe processing diameter | Diameter of round pipe | 130mm | ||
| Side length of rectangular tube | 8x8mm-120x120mm | |||
| Chuck maximum attached middle school | 100Kg | |||
| Max. rotation speed of chuck | 190r/min | |||
| Maximum acceleration | 1.5G | |||
| X/Y Axis positioning accuracy | 0.05mm/m | |||
| Automatic feeding range | round tube/square tube/rectangular tube | 4000mm-6200mm | ||
Automatic feeding device
The equipment is equipped with an automatic feeding device to meet the automatic feeding of round pipes, square pipes and other pipes to support the maximum pipe diameter.φ120mm (circumscribed circle) and 120mm maximum diagonal pipe; The feeding speed is greatly improved and the feeding is more efficient.
Square round chuck design
120 square chuck, the minimum can hold Φ 8mm round tube, the maximum can hold Φ 120mm round tube or side length ≤ 120mm square tube, rectangular tube, etc. High clamping precision, wide processing range, safe, stable and reliable.
Movable front chuck
The front chuck adopts a movable design, and the cutting tail is short30mm, the use efficiency is higher, the material cost is more economical (the above tail length needs to be under specific conditions, only in part of the pipe and manual mode can be achieved).
Tuesheet Welding Design
The beam adopts gantry tube plate welding design. After annealing treatment, it has high rigidity, high strength, good stability, and no vibration during cutting.
Smokeless processing
The three-dimensional air outlet design at the cutting place can accurately discharge the smoke generated during the cutting process, and the use is more environmentally friendly.
Samples
Submit your information for a customized solution
Filling in your phone and email information will help us get in touch with you in a timely manner and solve your problem as soon as possible.
Support
FINCM FUTURE provides you with 24/7 professional services, as well as diversified support plans and expert services to meet your needs from product use, routine maintenance to optimization and upgrading of the whole cycle, so that you can use FINCM FUTURE products in this process more efficient and economical!